بررسی hths viscosity روغن موتور
بسم الله الرحمن الرحیم .
.
camry maxima تعمیر تویوتا ماکسیما:
شاخص HTHS روغن موتور چیست ؟
HTHS measures the lubricant's resistance to flow at elevated temperatures under constant shear and high speeds between moving parts which have narrow tolerances—the lower the measured number, the lower the resistance to flow and the higher the anticipated fuel
HTHS
مقاومت روانکار را در برابر جریان در دماهای بالا تحت نیروی برشی ثابت و سرعتهای بالا ، بین قطعات متحرک که دارای تلورانسهای باریک هستند، اندازهگیری میکند. هرچه عدد اندازهگیری شده پایینتر باشد، مقاومت در برابر جریان کمتر و انتظار میرود که سوخت کمتری مصرف شود.
A lubricant with low HTHS viscosity improves fuel efficiency.
A lubricant with high HTHS viscosity offers better protection for engine parts.
The engine type:
Low HTHS oil in an engine designed for high HTHS oil can cause damage.
روانکاری با HTHS پایین، کارایی سوخت را بهبود میبخشد.
روانکاری با HTHS بالا، حفاظت بهتری از قطعات موتور ارائه میدهد.
نوع موتور: استفاده از روغن با HTHS پایین در موتوری که برای روغن با HTHS بالا طراحی شده، میتواند باعث آسیب شود.
HTHS viscosity
(High Temperature High Shear)
A lubricant with low viscosity can reduce friction and improve fuel consumption, but also increase wear. On the other hand, a lubricant with high HTHS viscosity maintains the lubricant film, preventing premature wear of the engine. However, it causes greater friction, thus increasing fuel consumption.
strength of the oil film under high temperature and load is more important than viscosity. Look for the oil with highest HTHS # within recommended viscosity range or one step up.
Most good 5-30 oils got better HTHS than toyota's 0-20 oil.
As far as know (my friend Google helped me a lot) absolute minimum HTHS for oils with new ILSAC GF4/5 certification is 2.6.
Toyota 0-20 oil HTHS- 2.9. Everything above 2.9 should protect your engine even better.
Valvoline Synpower 5-30 HTHS -3.3. Maxlife Synthetic-3.4. Mobil1 high mileage Synthetic-3.3.
You might lose 0.1-0.3MPG J but will gain better protection.
The unit for measuring HTHS is mPas (millipascal second). If the HTHS value is above 3.5 mPas, the HTHS viscosity is to be classified as normal. An HTHS value below 3.5 mPas is referred to as a reduced HTHS viscosity.
10W-40:
Oils with a 10W-40 viscosity rating generally have a higher HTHS viscosity compared to 5W-30 oils. This means they tend to maintain a thicker oil film and provide better protection at high temperatures and under high shear forces.
5W-30:
5W-30 oils typically have a lower HTHS viscosity than 10W-40 oils. This can lead to better fuel efficiency because the oil flows more easily and reduces internal friction in the engine.
A 10W-40 oil will generally have a higher HTHS viscosity than a 5W-30 oil, indicating it offers thicker protection at operating temperatures but may reduce fuel efficiency slightly.
10W-40:
A 10W-40 oil will have a higher HTHS viscosity because it is designed to remain thicker at operating temperatures compared to a 5W-30 oil. This thicker oil provides greater protection to engine parts but may also reduce fuel efficiency.
5W-30:
A 5W-30 oil has a lower HTHS viscosity, meaning it flows more freely at operating temperatures and is designed to be more fuel-efficient. However, it may offer slightly less protection than a 10W-40 oil in extreme conditions.
Fuel Efficiency vs. Engine Protection:
Lower HTHS viscosity generally translates to better fuel efficiency, but it can also mean less protection for the engine, especially in older or high-stress applications. Conversely, higher HTHS viscosity provides better engine protection but may reduce fuel efficiency
10W-40:
روغن 10W-40 دارای ویسکوزیته HTHS بالاتری است زیرا برای حفظ ضخامت بیشتر در دماهای عملیاتی نسبت به روغن 5W-30 طراحی شده است. این روغن ضخیمتر حفاظت بیشتری از قطعات موتور ارائه میدهد، اما ممکن است کارایی سوخت را کاهش دهد.
5W-30:
روغن 5W-30 دارای ویسکوزیته HTHS کمتری است، به این معنی که در دماهای عملیاتی به راحتی جریان مییابد و برای بهبود کارایی سوخت طراحی شده است. با این حال، ممکن است در شرایط شدید حفاظت کمتری نسبت به روغن 10W-40 ارائه دهد.
کارایی سوخت در مقابل حفاظت موتور:
ویسکوزیته HTHS پایینتر معمولاً به معنای بهبود کارایی سوخت است، اما میتواند به معنای حفاظت کمتر برای موتور نیز باشد، بهویژه در کاربردهای قدیمی یا با استرس بالا. برعکس، ویسکوزیته HTHS بالاتر حفاظت بهتری از موتور ارائه میدهد، اما ممکن است کارایی سوخت را کاهش دهد.
5W-30 oils
typically have HTHS viscosities between
2.5 and 3.5 mPa·s
The High Temperature High Shear (HTHS) viscosity of
10W-40 engine oils
varies by brand, but generally ranges from
2.9 to 4.4 mPa·s
ویسکوزیته HTHS چیست ؟
(ویسکوزیته در دما و فشار بالا)
یک روانکار با hths پایین میتواند اصطکاک را کاهش دهد و مصرف سوخت را بهبود بخشد، اما همچنین میتواند باعث افزایش سایش شود.
از طرف دیگر، یک روانکار با HTHS بالا، فیلم روانکار را حفظ میکند و از سایش زودرس موتور جلوگیری میکند. با این حال، این موضوع باعث افزایش اصطکاک میشود و در نتیجه مصرف سوخت را افزایش میدهد.
واحد اندازهگیری HTHS
، mPas (میلیپاسکال ثانیه)
است.
اگر مقدار HTHS بالای ۳.۵ mPas باشد، ویسکوزیته HTHS به عنوان نرمال طبقهبندی میشود.
مقدار HTHS زیر ۳.۵ mPas به عنوان ویسکوزیته HTHS کاهشیافته شناخته میشود.
روغنهای 5W-30 معمولاً دارای ویسکوزیته HTHS بین ۲.۵ تا ۳.۵ mPa·s هستند.
ویسکوزیته HTHS روغنهای موتور 10W-40 بسته به برند متفاوت است، اما به طور کلی در بازه ۲.۹ تا ۴.۴ mPa·s قرار دارد.